| TECHNICAL DATA |
Polyurethane |
NBR |
Viton?/font> |
| Operating pressure |
max 10 bar (max 1 MPa) |
| Temperature range |
–10癈?80癈 |
–10癈?80癈 |
–10癈?150癈 (non-magnetic cylinders) |
| Fluid |
Unlubricated air. Lubrication, if used, must be continuous |
| Bores |
?; ?0; ?2; ?6; ?0, ?5; |
| Design |
Threaded heads |
| Standard strokes |
Single-acting: for bores ??5 strokes from 0 to 50 mm |
| |
Double-acting:
for bores ??0 strokes from 0 to 100 mm
for bores ?2?6 strokes from 0 to 200 mm
for bores ?0?5 strokes from 0 to 500 mm |
| |
Double-acting, cushioned:
for bores ?6 strokes from 0 to 300 mm
for bores ?0?5 strokes from 0 to 500 |
| Versions |
Double-acting, Double-acting cushioned, Single-acting retracted piston rod, Through-rod, Through-rod cushioned, Version with piston rod block. |
| Magnet for sensors |
All versions come complete with magnet. Supplied without magnet on request. |
| Inrush pressure |
? to ?2: 0.8 bar - ?6 to ?5: 0.6 bar |
| Forces generated at 6 bar thrust/retraction |
?8: 28N / 22N ?10: 44N / 37N ?12: 64N / 50N
?16: 108N / 95N ?20: 169N/148N ?25: 265N / 228N |