主要用途：離合減速器與氣動執行器聯合使用，用于各種90°開啟的碟閥、球閥、旋塞閥等實現手動、氣動切換使用。
結構特點：
1、體積小、重量輕、設計合理，樣式新穎。
2、產品系列化，輸出扭矩從300—7000扭米可供選擇與氣動執行器及各種閥門匹配。
3、蝸輪連接內孔有相隔90°的兩個鍵槽，以便用戶根據需要選擇該裝置同閥體的相對位置。
4、提起限位銷旋轉偏心機構180°，限位銷自動限位，實現氣動、手動切換。
5、產品出廠時裝有專用潤滑油，外殼密封，防塵、防水、防護等級為IP65。
6、殼體材質：鑄鐵、球鐵、壓鑄鋁。
山西中信燎原機械制造有限公司
LHJ series Reducer(gear box) for Clutch
Matching with clutch and pneumatic operator on every kinds of plate valve, ball valve, stopcock and so on, to realize the option between manual control and pneumatic control.
Characteristics:
1、ini scale, low weight, reasonable and novel design.
2、With varieties of specification in output Nm/rpm from300 to 7000 with different pneumatic operator and valve.
3、 The two key grooves which are 90°opposite in gear’s connection hole make it is possible that adjusting the position of reducer and valve under customers’ required.
4、Pulling up the locking bolt to 180°to switch pneumatic and manual control.
5、 Special lubricating oil is equipped with the products, and the class of seal, unti-dust, unti-water, and protective quality is IP65.
6、Shell materials: cast iron, magnesium iron, and die-casting aluminum.
Shan Xi CITIC Liaoyuan
Machine Manufactory CO., Ltd